Category: Photography

The following are the basics of Digital SLR camera. SLR stands for Single Lens Reflex. An SLR camera will give you much more control over how the picture is taken. DSLR also allows for interchangeable lenses. Generally an SLR can produce pictures of much higher quality than point-and-shoot cameras. The image quality is extremely good since the lenses used in an SLR are usually superior.

The following terms are essential knowledge and terminology required for control of camera.

SLR Basic Terminology

Shutter speed: This is the speed of closing and opening of the camera shutter opening. The shutter speed determines the amount of time that light can pass through the aperture. Unlike the conventional film-based camera , the light sensor in a digital camera can be reset electronically. In another word, digital cameras have a digital shutter instead of a mechanical one. Shorter shutter speeds are needed for shooting in bright sunlight, while longer shutter speeds are needed for taking night shots or darkened areas.

Aperture size: The size of the opening in the camera body. The aperture functions automatically in most digital cameras.

F-stops: The F-number or F-stops are numbers on the len's aperture ring and the camera's LCD (where applicable). These numbers indicate the size of lens aperture. The lower the number the larger is the aperture. This means that the lower value let more light into the camera. Usually the numbers are 1.0,1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, etc. That means, F/1.4 will let more light to enter the camera than F/16.

Both shutter speed and F-stop determines the exposure of the shot.

Focal Length: It is denotes as the distance from the film/sensor to the len's center, when the camera is focused on a subject at infinity. These lengths are measured in millimeters. Lenses which allow varying focal lengths without changing focus are called zoom lenses.

Depth of field (DOF) : It refers to the distance from the focal point that a photo will be sharp, while the rest becomes blurry.The lower the F-stop number - such as F/1.4, the shorter your DOF will be. The higher the F-stop number - 16, the longer the depth of field. This simply means that shooting with a low F-stop will result in only what is being focussed remaining sharp. To have images with high sharpness throughout, the F-stop value much be higher such as F/16 or F/22.

Autofocus (AF) : It refers to the ability of some cameras to automatically obtain correct focus of a subject. In some camera models, the focus can also be continuously maintained. Autofocus able cameras normally rely on one or more sensors to determine correct the focus.

Digital Camera Basic Terminology

Resolution: Camera resolution is specified in megapixels. Pixels are the colour dots that make up an image. A camera with higher resolution will therefore produce better image quality.

White Balance: White balance adjusts the white color quality of your image. Digital cameras usually have adjustable settings for fluorescent lighting, tungsten lighting, sunlight etc. For example, Tungsten lamps cast an orange or yellow hue to your photos. By selecting the 'Tungsten white balance' mode will allow the digital camera to make the necessary adjustments.

Well, in a nutshell, these are the basic knowledge and terminology of Digital SLR. When sourcing for a new camera, these are the factors that should be considered.

Thank you for reading.

Other Basic Photography topics

Parts and Anatomy of a Digital SLR Camera
Parts of a Digital SLR Camera. Explains the basic components such as lens, bodies etc....

Camera and photography accessories
Describes common accessories and peripherals used for photography....